Operation CHARM: Car repair manuals for everyone.

DTC 10

DTC 10: Vehicle Speed Signal Error

NOTE: If DTC 110 and DTC 111 are stored at the same time as DTC 10, troubleshoot DTC 110 and DTC 111 first, then recheck for DTC 10.

1. Check for PGM-FI system DTCs with the HDS.

Are any DTC indicated?

YES - Troubleshoot the indicated PGM-FI system DTC(s).

NO - Go to step 2.

2. Check for VSA system DTCs with the HDS.

Are any DTCs indicated?

YES - Troubleshoot the indicated VSA system DTC(s).

NO - Go to step 3.

3. Clear the DTCs with the HDS.
4. Test-drive the vehicle at 9.3 mph (15 km/h) or more, and turn the adaptive cruise control (ACC) switch ON.
5. Test-drive with the adaptive cruise control (ACC) activated, and watch the adaptive cruise control (ACC) indicator.

Does the adaptive cruise control (ACC) indicator come on?

YES - Go to step 6.

NO - Intermittent failure. The system is OK at this time. Check for loose or poor connections.

6. Check for DTCs with the HDS.

Is DTC 10 indicated?

YES - Check for loose or poor connections. If OK, replace the adaptive cruise control (ACC) unit.

NO - Troubleshoot the indicated DTC.