Rear Seat

Rear Seat Removal/Installation

NOTE: Take care not to scratch the body or tear the seat covers.




1. Pull the seat hook knobs (A) while pushing down on the seat cushion (B), to release the hooks (C).




2. Remove the seat cushion (A), and release the center seat belt buckles (B) from their slits (C).




3. Release the seat belt (A) from their guides (B).
4. Remove the rear center seat belt and rear seat belt buckles.




5. Remove the bolts from the base of the seat-back (A).
6. Disconnect the power head restraint connector (B).




7. Lift the seat-back (A) up to release the wire loops (B) from the hooks (C) on the body, then remove the seat-back.
8. Install the seat in the reverse order of removal, and note these items:
- Guide the belts over the front of the seat-back as you install it.
- Before attaching the rear seat-back and cushion, make sure there are no twists or kinks in the seat belts.
- When installing the seat cushion, slip the seat belt buckles through the slits in the seat cushion.