Left Rear Window Switch Input Test
Left Rear Window Switch Input Test1. Turn the ignition switch OFF.
2. Remove the left rear window switch.
3. Disconnect the 14P connector from the left rear window switch.
4. Inspect the connector and socket terminals to be sure they are all making good contact.
- If the terminals are bent, loose or corroded, repair them as necessary and recheck the system.
- If the terminals look OK, go to step 5.
5. With the connector still disconnected, make these input tests at the connector.
- If any test indicates a problem, find and correct the cause, then recheck the system.
- If all the input tests prove OK, the left rear window switch must be faulty; replace it.