DTC 23

DTC 23: Pulser
1. Clear the DTC.
2. Test-drive the vehicle at 19 mph (30 km/h) or more.
Does the ABS indicator come on, and are DTCs 21, 22, 23, 24 indicated?
YES: Go to step 3.
NO: The system is OK at this time.





3. Check the appropriate purser gear for a chipped or damaged tooth (see table).
Are the purser gears OK?
YES: Check for loose terminals in the ABS control unit 25P connector. If necessary, substitute a known-good ABS modulator-control unit, and recheck.
NO: Replace the driveshaft or hub unit with the chipped purser gear.