Rear Bumper: Service and Repair
Rear Bumper Removal/Installation05-06 Models
NOTE:
- Have an assistant help you when removing and installing the rear bumper.
- Take care not to scratch the rear bumper and body.
- Put on gloves to protect your hands.
1. Remove the rear bumper as shown.
2. Install the bumper in the reverse order of removal, and note these items:
- Make sure the rear license light connector is plugged in properly.
- Make sure the rear bumper engages the hooks of the side spacers and upper beams on both sides securely.
- Replace any damaged or stress-whitened clips.
- Push the clips into place securely.