Trim Removal/Installation - Rear Side Area

Trim Removal/Installation - Rear Side Area

Special Tools Required
KTC trim tool set SOJATP2014

NOTE:
- Put on gloves to protect your hands.
- Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
- Take care not to bend or scratch the trim and panels.

1. Remove these items, and remove the trim as shown:
- Rear seat-back and seat cushion
- Rear seat-back pivot bracket
- Door sill trim




2. Install the trim in the reverse order of removal, and note these items:
- Replace any damaged or stress-whitened clips.
- Make sure the connectors are plugged in properly.
- When installing the rear side trim panel, make sure there are no pinches in the belt.
- Apply liquid thread lock to the rear seat-back pivot bolt before installation.
- Push the clips into place securely.