Front Seat Disassembly/Reassembly - Passenger's
Front Seat Disassembly/Reassembly - Passenger'sSpecial Tools Required
KTC trim tool set SOJATP2014
SRS components are located in this area. Review the SRS component locations and the precautions and procedures before performing repairs or service.
NOTE:
- Take care not to tear the seams or damage the seat covers.
- Put on gloves to protect your hands.
- Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
- For seat cushion removal and installation procedures, refer to Front Seat Cover Replacement.
- Apply multipurpose grease to the moving portion of the seat track.
- To prevent wrinkles in the seat cushion cover, stretch the material evenly over the pad.
- Adjust the rear seat access cable.
- Make sure the rear seat access cable is connected properly on each portion.
- Replace any damaged or stress-whitened clips.
- Push the cover clips into place securely.