Key Interlock Solenoid Test
Key Interlock Solenoid Test1. Remove the driver's dashboard lower cover.
2. Remove the lower steering column cover.
3. Disconnect the steering lock assembly connector (6P). Insert the ignition key in the key cylinder, then turn the ignition key to ACC (I).
4. Connect the No. 4 terminal of the steering lock assembly connector (6P) to the battery positive terminal, and connect the No. 3 terminal to the battery negative terminal. Try to turn the ignition key to LOCK (0) and then remove from the key cylinder.
5. If the ignition key cannot be turned and removed from the cylinder, replace the ignition key cylinder/steering lock assembly.