Wiper Switch: Service and Repair

Wiper/Washer Switch Test/Replacement

1. Remove the dashboard lower cover.
2. Remove the steering column covers.




3. Disconnect the 14P connector (A) from the wiper/washer switch (B).
4. Remove the two screw, then pull out the wiper/washer switch.




5. Inspect the connector terminals to be sure they are all making good contact.
- If the terminals are bent. loose or corroded, repair thorn as necessary, and recheck the system.
- If the terminals look OK, check for continuity between the terminals in each switch position according to the tables.

6. If the continuity is not as specified, replace the switch.