B1235

DTC B1235 or DTC indicator K: A Problem in the Driver's Air Mix Control Linkage, Door, or Motor

1. Clear the DTC by turning the ignition switch OFF, and then ON (II).
2. Operate the climate control system in several modes.
3. Check for DTCs using the self-diagnostic or HDS.

Is DTC B1235 or K indicated?

YES - Go to step 4.

NO - Intermittent failure.

4. Turn the ignition switch OFF.
5. Test the driver's air mix control motor.

Is the driver's air mix control motor OK?

YES - Substitute a known-good climate control unit, and recheck. If the symptom/indication goes away, replace the original climate control unit.

NO - Replace the driver's air mix control motor, or repair the driver's air mix control linkage or door.