Trim Removal/Installation - Trunk Lid
Trim Removal/Installation - Trunk LidSpecial Tools Required
KTC trim tool set SOJATP2014 *
* Available through the American Honda Tool and Equipment Program
NOTE:
- Put on gloves to protect your hands.
- Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
- Take care not to bend or scratch the trim and panels.
1. While pulling the outside of the trunk lid cushion (A), slide it outward and remove it on each side.
2. Remove the trunk lid trim (A).
1. Remove the screw (B), then remove the trunk lid handle (C).
2. Release all the clips (D).
3. Remove the trim while passing both trunk lid hinges through the slits (E).
3. Remove the trunk hinge upper trim (A) and trunk hinge lower trim (B), if necessary.
4. Install the trim in the reverse order of removal, and note these items:
- Check for damaged or stress-whitened clips, and replace them with new ones.
- When installing the trunk lid trim, slip the trunk lid hinges through the slits in the trunk lid trim.
- Push the clips into place securely.