Dashboard Upper Panel

Dashboard Upper Panel Removal/Installation

SRS components are located in this area. Review the SRS component locations and the precautions and procedures before performing repairs or service.

NOTE: Put on gloves to protect your hands.

1. Remove the dashboard.
2. Remove the these items from the dashboard:
- Gauge control module
- Audio-HVAC-display module
- Side vent, both sides
- Tweeter, both sides
- Sunlight sensor
- Glove box striker
- Attach bracket




3. Remove the screw, slide the passenger's NC duct (A) inside, then lower the duct to remove it.
4. Remove the these items:
- Passenger's airbag
- Steering hanger beam




5. Remove the screws, then remove the front vent duct (A).




6. Remove the screws, then remove the driver's vent duct (A).




7. Remove the screws, then remove the passenger's vent duct (A).
8. Install the dashboard upper panel in the reverse order of removal.