Front Seat Lumbar Support Replacement
Front Seat Lumbar Support ReplacementDriver's seat
SRS components are located in this area. Review the SRS component locations and precautions and procedures before performing repairs or service.
NOTE:
- Take care not to bend the cable.
- Take care not to tear the seams or damage the seat covers.
- Put on gloves to protect your hands.
1. Remove the back panel.
2. Release the hooks (A) and clips (B).
3. Turn over the seat-back cover (A). Disconnect the power lumbar support motor connector (B), then remove the bolts.
4. Remove the metal clamps (A) and detach the clips, then remove the lumbar support (B) and motor (C) as an assembly.
5. Install the lumbar support in the reverse order of removal, and note these items:
- Make sure the cable is connected securely.
- To prevent wrinkles when installing a seat-back cover, make sure the material is stretched evenly over the pad before securing the hook strips.
- Replace the back panel clips with new ones.
- Replace the metal clips with new ones.