Reverse Lock System Circuit Troubleshooting

Reverse Lock System Circuit Troubleshooting
1. Check whether DTC P0705 or P0706 is indicated.
Is either DTC indicated?
YES-Perform the troubleshooting for the indicated code.
NO-Go to step 2.
2. Turn the ignition switch OFF.
3. Shift the shift lever to the P position while pushing the shift lock release.
4. Turn the ignition switch ON (II).
5. Press the brake pedal and release the accelerator, shift the shift lever out of the P position, and check that the shift lock solenoid operates.
Does the shift lock solenoid work properly?
YES-Check the reverse lock (shift lock mechanism). If the mechanism does not work, repair or replace the shift lever assembly.
NO-Do the Shift Lock System Circuit Troubleshooting.