B1152

DTC B1152: Gauge Control Module Internal Error (EEPROM error)

NOTE: If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test mode A.

1. Clear the DTCs with the HDS.
2. Start the engine.
3. Wait for 6 seconds.
4. Check for DTCs with the HDS.

Is DTC B1152 indicated?

YES - Faulty gauge control module; replace the gauge control module.

NO - Intermittent failure, the gauge control module is OK at this time. Check for loose poor connections. If the connections are good, check the battery condition and the charging system.