DTC 10
DTC 10: Vehicle Speed Signal ErrorNOTE: If DTC 110 and DTC 111 are stored at the same time as DTC 10, troubleshoot DTC 110 and DTC 111 first, then recheck for DTC 10.
1. Check for PGM-FI system DTCs with the HDS.
Are any DTC indicated?
YES - Troubleshoot the indicated PGM-FI system DTC(s).
NO - Go to step 2.
2. Check for VSA system DTCs with the HDS.
Are any DTCs indicated?
YES - Troubleshoot the indicated VSA system DTC(s).
NO - Go to step 3.
3. Clear the DTCs with the HDS.
4. Test-drive the vehicle at 9.3 mph (15 km/h) or more, and turn the adaptive cruise control (ACC) switch ON.
5. Test-drive with the adaptive cruise control (ACC) activated, and watch the adaptive cruise control (ACC) indicator.
Does the adaptive cruise control (ACC) indicator come on?
YES - Go to step 6.
NO - Intermittent failure. The system is OK at this time. Check for loose or poor connections.
6. Check for DTCs with the HDS.
Is DTC 10 indicated?
YES - Check for loose or poor connections. If OK, replace the adaptive cruise control (ACC) unit.
NO - Troubleshoot the indicated DTC.