DTC 83

DTC 83: No VSP Signal
1. Test-drive the vehicle, and monitor the VSP signal with the HDS.
Is the VSP signal OK?
YES - The system is OK at this time. Clear the DTC.
NO - Go to step 2.

2. Turn the ignition switch OFF.
3. Turn the ignition switch ON (II).
4. Check for DTCs with the HDS.
Is DTC 85 indicated?
YES - Go to the DTC 85 troubleshooting. DTC 85
NO - Check for loose terminals and poor connections at the TPMS control unit. If necessary, substitute a known-good TPMS control unit and recheck.