Operation CHARM: Car repair manuals for everyone.

Non-Trouble Code Procedures

Forced Starting of Display

Special tools required
SCS Service Connector 07PAZ-0010100

1. Remove the trunk trim.
2. Turn the ignition switch OFF.




3. Connect the SCS service connector (A) to the navigation service connector (B) located behind of the navigation unit.
4. Turn the ignition switch ON (II).
5. Check that the diagnosis menu for the picture diagnosis starts up, and then changes to the system link menu.

NOTE: If the display fails to display the system link screen, refer to no picture is displayed. No Picture Is Displayed