Center Trim

Center Trim Removal/Installation

Special Tools Required
KTC trim tool set SOJATP2014 *
* Available through the American Honda Tool and Equipment Program

NOTE:
- Put on gloves to protect your hands.
- Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
- Take care not to scratch the trim and panels.

1. Remove these items:
- Console panel
- Console front cover, both sides




2. Remove the bolts securing the front of the center console (A), then pull out both sides as needed.




3. Gently pull out along the bottom to release the clips and hooks (A), then remove the center trim (B).
4. Install the trim in the reverse order of removal, and note these items:
- Check if the clips are damaged or stress-whitened, and if necessary, replace them with new ones.
- Push the clip portions into place securely.