Door and Trunk LF Antenna Test

Door and Trunk LF Antenna Test

NOTE: Before symptom troubleshooting, check the DTC troubleshooting. If a DTC is indicated, troubleshoot the indicated DTC first.

1. Connect the HDS to the data link connector (DLC).
2. Turn the ignition switch ON (II) with the built-in key.
3. Select the KEYLESS ACCESS from the SYSTEM SELECT menu of the HDS.
4. Select the SELF CHECK and if any malfunction is found, troubleshoot it first.







5. Select the FUNCTIONAL TEST, and do the antenna driving test by checking the transmitting areas (A) between the LF antenna and the keyless remote.

NOTE:
- Forced driving checks cannot operate at the same time, check the LF antennas one at a time.
- Test the transmitting area at about 35.4 in. (90 cm) height from the ground.
- The LED will blink when the keyless remote is within the shaded areas.