Rear Seat Armrest Cover

Rear Seat Armrest Cover Replacement

NOTE: Take care not to tear the seams or damage the seat covers.

1. Remove the seat-back.
2. Remove the armrest from the seat-back.
3. Remove the armrest beverage holder from the armrest.




4. Remove the E clips (A), then remove the brackets (B) from both sides of the armrest (C).
5. If necessary, remove the bushings (D) from the brackets.




6. Release the hooks (A).




7. Pull back the armrest cover (A) all the way around, and release the Velcro fasteners (B), then separate the armrest cover and pad (C).
8. Install the cover in the reverse order of removal, and to prevent wrinkles, make sure the material is stretched evenly over the pad before securing the hooks strips and fastener.