Driver's Dashboard Under Cover

Driver's Dashboard Undercover Removal/Installation

Special Tools Required
KTC trim tool set SOJATP2014 *
* Available through the American Honda Tool and Equipment Program

NOTE:
- Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
- Take care not to scratch the dashboard and related parts.

1. Remove the driver's dashboard undercover (A).
1. Gently pull down the front edge to detach the clips (B, C).
2. Disconnect the ambient light connector (D).




3. Pull the cover away to release the pin (E) from the holder (F).

2. Install the cover in the reverse order of removal, and note these items:
- Check if the clips are damaged or stress-whitened, and if necessary, replace them with new ones.
- Push the clips into place securely.
- Make sure the holder of the cover is installed securely to the pin.