Passenger's Dashboard Undercover

Passenger's Dashboard Undercover Removal/Installation

NOTE: Take care not to scratch the dashboard and related parts.

1. Remove the Passenger's dashboard undercover (A).
1. Gently pull down the front edge to detach the clips (B).
2. Disconnect the ambient light connector (C).




3. Pull the cover away to release the pins (D) from the holders (E).

2. Install the cover in the reverse order of removal, and note these items:
- Check if the clips are damaged or stress whitened, and if necessary, replace them with new ones.
- Push the clips into place securely.
- Make sure the connector is plugged in properly.
- Make sure the pins of the cover are installed securely to the holders.