Fog/Driving Lamp: Service and Repair
Fog Light ReplacementBulb Replacement
1. Remove the splash shield.
2. Disconnect the 2P connector (A) from the fog light (B).
3. Turn the bulb socket (C) 45 degrees counterclockwise to remove it from the housing.
4. Install a new bulb in the reverse order of removal.
Replacement
1. Remove the front bumper.
2. Remove the front bumper protector.
3. Remove the bolts and screws from the fog light (A).
4. Remove the screws, and separate the bracket (B) and fog light.
5. Install in the reverse order of removal.
6. After replacement, adjust the fog lights at the adjuster (A) to local requirements.