Trunk / Liftgate: Adjustments

Hatch

Adjustment

1. Remove the support strut from each side
2. Remove the headliner
3. Slightly loosen each screw and nut.




4. Adjust the hatch (A) alignment in the following sequence:
- Adjust the hatch hinges (B) right and left, as well as forward and rearward, using the elongated holes.
- Turn the hatch edge cushions (C) in or out, as necessary, to make the hatch fit flush with the body at the side edges.
- Adjust the fit between the hatch and hatch opening by moving the striker (D).

5. Tighten each screw and nut securely.
6. Check that the hatch opens properly and locks, securely.
7. Reinstall the support struts securely.
8. Reinstall all remaining removed parts.




9. Apply multipurpose grease to the pivot portion of the hatch hinges as indicated by the arrows.