Front Bumper Lower Grille

Front Bumper Lower Grille Replacement

Special Tools Required
KTC trim tool set SOJATP2014

05-06 Models

NOTE:
- Put on gloves to protect your hands.
- Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
- Take care not to scratch the front bumper.

1. Remove the front bumper.
2. Remove the license-plate.




3. Remove the bolts (A, B), then remove the license plate base (C) from the front bumper (D).







4. From the back of the front bumper (A), remove the screws (B), and release the speed nuts (C) securing the front bumper lower grille (D) by using pliers (E) as shown.




5. Detach the hooks (A) on the bottom of the front bumper lower grille (B), and pull out the grille to release it from the pins (C) of the front bumper (D), then remove the grille.
6. Install the grille in the reverse order of removal, and note these items:
- Push the hooks into place securely.
- Release the speed nuts with new ones.