Trim Removal/Installation - Hatch Area
Trim Removal/Installation - Hatch AreaSpecial Tools Required
KTC trim tool set SOJATP2014
NOTE:
- Put on gloves to protect your hands.
- Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
- Take care not to bend or scratch the trim and panels.
1. Remove the trim in the sequence shown:
- Rear shelf
- Rear shelf hooks
- Right hatch side trim
- Left hatch side trim
- Hatch trim panel
2. Install the trim in the reverse order of removal, and note these items:
- Replace any damaged or stress-whitenings clips,
- If the threads on a pull pocket screw are worn out, use an oversized self-tapping ET screw (P/N 90137-S2G-003) made specifically for this application.
- Push the clips into place securely.