Interior - Driver's Vanty Mirror Cover Broken At Hinge
09-031Applies To:
2006 RSX - ALL
August 15, 2009
Vanity Mirror Cover Breaks At Hinges
SYMPTOM
The driver's or passenger's vanity mirror cover breaks at the hinge in the sunvisor assembly.
PROBABLE CAUSE
The material in the hinge area is too thin.
CORRECTIVE ACTION
Replace the damaged sunvisor assembly.
PARTS INFORMATION
Right Sunvisor Assembly, NH220L, Clear Gray
P/N 83230-56M-A03ZA
Right Sunvisor Assembly, YR233L, Titanium:
P/N 83230-56M-A03ZB
Left Sunvisor Assembly, NH220L, Clear Gray:
P/N 83280-56M-A13ZA
Left Sunvisor Assembly, YR233L, Titanium:
P/N 83280-56M-A13ZB
SPECIAL TOOLS
KTM trim tool set: SOJATP2014
WARRANTY CLAIM INFORMATION
In warranty:
The normal warranty applies.
Failed Part: 83230-S6M-A03ZA
Defect Code: 01801
Symptom Code: 01201
Skill Level: Repair Technician
Out of warranty:
Any repair performed after warranty expiration may be eligible for goodwill consideration by the District Parts and Service Manager or your Zone Office. You must request consideration, and get a decision, before starting work.
REPAIR PROCEDURE
NOTE:
^ Use the appropriate tool from the KTC trim tool set to avoid damage when prying parts
^ Take care not to scratch the headliner, the dashboard, and other interior trim pieces.
1. Remove the sunvisor assembly:
^ Remove the cap.
^ Remove the self-tapping ET screws.
^ Remove the sunvisor from the body and holder.
2. Install the replacement sunvisor assembly in the reverse order of removal.
NOTE:
If the threads on a visor screw are worn out, use an oversized self-tapping ET screw (P/N 90137-S30-003) made specifically for this application.
Disclaimer