Cruise Control Servo: Service and Repair
Cruise Control Actuator/Cable Replacement1. K20A3 engine: Remove the throttle cover (A), fully open the cruise control link by hand, then remove the cruise control cable (B) from link. Loosen the locknut (C), and remove the cable from the bracket.
2. K20A2, K20Z1 engines: Fully open the cruise control link by hand, then remove the cruise control cable (A) from the link. Loosen the locknut (B), and remove the cable from the bracket.
3. Remove the cowl cover.
4. Disconnect the 4P connector, and remove the two bolts securing the cruise control actuator.
5. Remove the actuator cover (A), then remove the actuator cable (B) from the cruise control actuator.
6. Remove the bracket from the cruise control actuator.
7. Install in the reverse order of removal, and adjust the free play at the throttle linkage after connecting the actuator cable.