Rear Seat Belt
Rear Seat Belt ReplacementNOTE: Check the rear seat belts for damage, and replace them if necessary.
Rear Seat Belt
1. Remove the rear side trim panel.
2. Remove the lower anchor bolt (A).
3. Remove the upper anchor cap (A), and remove the upper anchor bolt (B).
4. Remove the quarter pillar trim as necessary.
5. Remove the retractor mounting bolt (A) and the retractor bolt (B), then remove the rear seat belt (C) and retractor (D).
6. Install the belt in the reverse order of removal, and note these items:
- Apply liquid thread lock to the anchor bolts before reinstallation.
- Check that the retractor locking mechanism functions as described.
- Assemble the washers, collars, and bushing on the upper anchor bolt as shown.
- Before installing the anchor bolt, make sure there are no twists or kinks in the seat belt.
Seat Belt Buckles
1. Remove the rear seat cushion.
2. Remove the center anchor bolts (A), and remove the seat belt buckles (B).
3. Install the buckles in the reverse order of removal, and apply liquid thread lock to the anchor bolts before reinstallation.