Operation CHARM: Car repair manuals for everyone.
Home >> Acura >> 2006 >> RSX L4-2.0L >> Repair and Diagnosis >> Sensors and Switches >> Sensors and Switches - Transmission and Drivetrain >> Sensors and Switches - A/T >> Transmission Speed Sensor >> Service and Repair

Transmission Speed Sensor: Service and Repair

Input Shaft (Mainshaft) and Output Shaft (Countershaft) Speed Sensor Replacement
1. Disconnect the input shaft (mainshaft) speed sensor connector and output shaft (countershaft) speed sensor connector.
2. Remove the input shaft (mainshaft) speed sensor (A) and output shaft (countershaft) speed sensor (B).





3. Install the new O-ring (C) on the input shaft (mainshaft) speed sensor, and install the input shaft (mainshaft) speed sensor in the transmission housing.
4. Install the new O-ring (D) on the output shaft (countershaft) speed sensor, and install the output shaft (countershaft) speed sensor in the transmission housing.
5. Check the connectors for rust, dirt, or oil, then connect the connectors securely.
pro multis · About Operation CHARM