ATF Replacement
ATF ReplacementNOTE: Keep all foreign particles out of the transmission.
1. Bring the transmission up to normal operating temperature (the radiator fan comes on).
2. Park the vehicle on level ground, and turn the engine off.
3. Remove the drain plug (A), and drain the automatic transmission fluid (ATF).
4. Reinstall the drain plug with a new sealing washer (B).
5. Remove the dipstick, and refill transmission with the recommended fluid amount through the dipstick hole until the level reaches the upper mark on the dipstick. Always use ACURA ATF DW-1 (ATF Z1 has been replaced by ATF DW-1, Honda Service News Nov 2010) Automatic Transmission Fluid (ATF). Using a non Acura ATF can affect shift quality,
Automatic Transmission Fluid Capacity:
2.9 L (3.1 US qt) at change
6.5 L (6.9 US qt) at overhaul
6. Insert the dipstick (A) back into the transmission in the direction (B) shown.
