Key Interlock Solenoid Test

Key Interlock Solenoid Test
1. Remove the driver's dashboard lower cover.
2. Remove the lower steering column cover.
3. Disconnect the steering lock assembly connector (6P). Insert the ignition key in the key cylinder, then turn the ignition key to ACC (1).
4. Connect the steering lock assembly connector (6P) terminal No. 4 to the battery positive terminal, and connect the battery negative terminal to terminal No. 3. Try to turn the ignition key to LOCK (0) and then remove from the key cylinder.
5. If the ignition key cannot be turned and removed from the cylinder, replace the ignition key cylinder/steering lock assembly.