B1152

DTC B1152: Gauge Control Module EEPROM Error

NOTE: If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN system diagnosis test mode A.

1. Clear the DTCs with the HDS.
2. Start the engine.
3. Check for DTCs with the HDS.

Is DTC B1152 indicated?

YES - Faulty gauge control module; replace the gauge control module.

NO - Intermittent failure, the gauge control module is OK at this time. Check pinfits and connections. If the connections are good, check the battery condition, and the charging system.