B1834

DTC B1834: M/T Harness Poor Ground

NOTE: If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN system diagnosis test mode A.

1. Clear the DTC with the HDS.
2. Turn the ignition switch OFF, and then back ON (II).
3. Operate the power seat with the power seat adjustment switch.
4. Check for DTCs with the HDS.

Is DTC 1834 indicated?

YES - Go to step 5.

NO - Intermittent failure, the system is OK at this time.




5. Check for voltage between the power seat control unit connector A (20P) No. 8 terminal and body ground.

Is there 1 V or less?

YES - Check for poor connection between the power seat control unit connector A (20P) and G503,G601. If the wire and ground are OK, replace the power seat control unit.

NO - Check for the poor ground (G503, G601) or repair an open in the wire.