Rear Bumper: Service and Repair

Rear Bumper Removal/Installation

Special Tools Required
KTC trim tool set SOJATP2014 *
* Available through the American Honda Tool and Equipment Program

NOTE:
- Have an assistant help you when removing and installing the rear bumper.
- Take care not to scratch the rear bumper and body.
- Put on gloves to protect your hands.
- Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.




1. Remove the rear bumper as shown.




2. Remove the rear bumper absorber as shown.
3. Install the bumper in the reverse order of removal, and note these items:
- Make sure the rear bumper engages the hooks of the side spacers, side brackets and upper brackets on both sides securely.
- Check for damaged or stress-whitened clips, and replace them with new ones.
- Push the clips and hooks into place securely.