Timing Components: Specifications

Crankshaft Pulley





Install the crankshaft pulley, and tighten the bolt. Do not use an impact wrench.
- 1 Hold the pulley with the holder handle (A) and holder attachment (B), then tighten the bolt to 64 Nm (6.5 kgf-m, 47 ft. lbs.) with a torque wrench and heavy duty 19 mm socket (C).
- 2 Mark the bolt head (D) and crankshaft pulley (E) as shown, then tighten the bolt an additional 60° (The mark on the bolt head lines up with the mark on the crankshaft pulley).

Timing Belt Tensioner





Remove the bolt (A), then remove the timing belt adjuster (B) and collar (C).
Install in the reverse order of removal.

Timing Cover





Install the lower cover.





Install the front upper cover (A) and rear upper cover (B).