20. Countershaft Bearing Replacement

Countershaft Bearing Replacement
Special Tools Required
- Adjustable bearing puller, 45-75 mm 07YAC-0010100
- Attachment, 72 x 75 mm 07746-0010600
- Driver 07749-0010000
- Slide hammer, commercially available





1. Remove the bearing set plate (A) from the clutch housing (B).





2. Remove the needle bearing (A) from the clutch housing (B) using the special tool and a commercially available 3/8"-16 slide hammer (C).





3. Install the new needle bearing (A) using the special tools.





4. Install the bearing set plate (A) with bolts (B).