Rear Seat-Back Cover Replacement
Rear Seat-back Cover ReplacementNOTE:
- Take care not to tear the seams or damage the seat covers.
- Put on gloves to protect your hands.
1. Remove the seat-back.
2. Remove these items:
- Armrest
- Headrest
3. Left seat-back: Remove the screw, then remove the center belt guide.
4. Left seat-back: From the front of the seat-back, detach the clips to remove the armrest back panel (A).
5. Left seat-back: Release the hooks (A, B) from the seat-back frame (C).
6. Release the hook (A) and fastener (B), and unzip the seat-back cover (C). The left seat-back is shown; the right seat-back is similar.
7. Release all the clips (A), and fold back the seat-back cover (B).
8. Pull out the seat-back pad (A) from the frame (B), then pull out the headrest guides (C) while pinching the end of the guides, and remove them.
9. Remove the seat-back cover and pad from the seat-back frame.
10. Pull back the edge of the seat-back cover (A) all the way around, and release the clips (B), then remove the seat-back cover.
11. Install the cover in the reverse order of removal, and note these items:
- To prevent wrinkles, make sure the material is stretched evenly over the pad before securing the clips.
- Replace any clips you removed with new ones. Install them with commercially available upholstery ring pliers.