Disassembly/Reassembly - 4-Way Power

Front Seat Linkage Disassembly/Reassembly - 4-Way Power




'05 Model

NOTE:
- Put on gloves to protect your hands.
- Apply multipurpose grease to the sliding and pivot portions of the linkage.




'06-07 Models

- The ODS unit must be calibrated after any for this actions
- Front passenger's seat replacement (including any seat components)
- Replacement of the seat weight sensors

NOTE:
- Put on gloves to protect your hands.
- To remove the slide motor and slide gearbox, slide the front seat forward fully.
- Before installing the slide motor and slide gearbox, align portion (A) as shown to align both slide gearbox positions.
- Apply multipurpose grease to the sliding and pivot portions of the linkage.
- When tightening the weight sensor mounting nuts, tighten the nuts in the sequence shown. Improper tightening could cause the passenger's airbag system to malfunction.
- Make sure the weight sensor unit connectors are plugged in properly.
- Make sure the weight sensor wires are routed properly so they are not pinched and do not interfere with other parts.
- Install the seat weight sensors.