DTC 14-2

DTC 14-1, 14-2: Lateral/Longitudinal Acceleration Sensor Neutral Position

1. Clear the DTC with the HDS.
2. Start the engine.
3. Check for DTCs with the HDS.

Is DTC 14-1 and/or 14-2 indicated?

YES - Go to step 4.

NO - Intermittent failure, the system is OK at this time.

4. Place the vehicle on a flat surface.
5. Check the lateral/longitudinal acceleration sensor A/D value in the DATA LIST with the HDS.

Is there about 2.2-2.8 V?

YES - Go to step 6.

NO - Check the yaw rate-lateral/longitudinal acceleration sensor installation.

6. Check for yaw rate-lateral/longitudinal acceleration neutral position memorization with the HDS.

Is the value "OK"?

YES - Replace the SH-AWD control unit.

NO - Do the yaw rate-lateral/longitudinal acceleration neutral position memorization. Neutral Position Memorization