DTC 19-1

DTC 19-1: Steering Angle Sensor (Open)

1. Clear the DTC with the HDS.
2. Start the engine.
3. Check for DTCs with the HDS.

Is DTC 19-1 indicated?

YES - Go to step 4.

NO - Intermittent failure, system is OK at this time. If any other DTCs are indicated, go to the indicated DTC's troubleshooting.

4. Check for DTCs in the VSA system with the HDS. Are any VSA System DTCs indicated?

YES - Go to the indicated DTC's troubleshooting.

NO - Repair open in the wire between SH-AWD control unit connector A and the steering angle sensor connector. Check for loose connector terminals at the SH-AWD control unit and repair if necessary.