Save Users Memory
Save users MemoryWhen replacing the navigation unit, this function allows the dealer to transfer the customer's personal data to the new navigation unit.
This is similar to saving and entering the customer's audio presets when replacing an audio core. The transferred information includes their Setup settings, and personal addresses. The dealer inserts a PC card (like the PC card in the HDS), and then selects the "Save users Memory" function. The two functions in this diagnostic screen are Export and Import. Export saves the customer's data to the PC card, and Import moves the PC card files to the new core.
See the FAQs for information regarding PC cards, and the use of this function.
Export
Select this button to move the customer's data from the original navi ECU to the PC card. Select "YES" on the "Export User Data" Confirmation screen. The process takes only a couple of seconds. The system stores two small files on the card.
Import
After installing the customer's original DVD in the new core, allow the system to boot up. Insert the PC card in the new core and enter the navigation diagnostic mode.
Select "YES" on the "Import Confirmation" screen.
Import moves the two files stored by the Export process from the PC card to the new navi ECU. When the transfer is finished (a few seconds) the system will automatically reboot. After the system reboots, remove the PC card from the PC slot.
If the Import button is grayed out, follow the troubleshooting in the FAQs below. The customer's files can only be transferred to a new core if the "Model" and the "Program Flash" shown on the "Version" screen are the same. So files cannot be transferred from Civic to Accord, or from a Civic with version 1.07.00 to a Civic with version 1.32.00.