Sunroof / Moonroof: Adjustments

Glass Position Adjustment

The roof panel (A) should be even with the glass weatherstrip (B), to within 0-1/-1 mm (0+0.04/-0.04 in.) all the way around, and to within 13.5+1/-1 mm (0.53+0.04/-0.04 in.) between the roof panel and the front edge of the glass (C). If not, make the following adjustment:






NOTE: Do the moon roof motor calibration procedure. If glass position is still incorrect go to step 1.

1. Remove the bracket cover.




2. Using a T25 TORX bit, loosen the bolts on each side, and adjust the glass (A).
3. If necessary, repeat on the opposite side.

NOTE: After glass height is mechanically adjusted. Do the moonroof calibration.