Operation CHARM: Car repair manuals for everyone.

General Troubleshooting Information

How to Troubleshoot TPMS DTCs
DTC troubleshooting procedures assume the cause of the problem is still present and the TPMS indicator is still on.

(NOTE: The TPMS indicator comes on for DTCs 11, 13, 15, and 17 only if the low tire pressure indication is false, caused by a problem in the system.)

Do not use a troubleshooting procedure unless the system has set the DTC listed for it.

1. Ask the customer to describe the conditions when the indicator came on, and try to reproduce the same conditions for troubleshooting. Find out if the customer checked and/or adjusted tire pressures since the indicator came on.
2. If an indicator does not come on during the test-drive, check for loose terminals, poor contact due to damaged terminals, etc. before you start troubleshooting.
3. After troubleshooting, clear the DTCs, and test-drive the vehicle. Make sure no indicators come on.