Without Scan Tool

Displaying the DTC (use only if the HDS is unavailable)

1. Turn the ignition switch OFF.
2. Short the SCS line to body ground.
3. Turn the ignition switch ON (II).
(In this point, the AFS indicator comes on for 2 seconds.)
4. Within 3 seconds after the indicator turns off, push the AFS OFF switch three times.
5. Within 6 seconds after the indicator turns off, the indicator starts to indicate the DTCs.
- If there is a DTC, the indicator starts to blink.
- If there is no DTCs, the indicator comes on and stays on.