Shift Lever Removal

Shift Lever Removal
1. Remove the center console cover.
2. Shift the transmission into the R position.
3. Remove the nut securing the shift cable end.





4. Press the holder lock release (A), and pull out the socket holder (B) to remove the shift cable (C) from the shift lever bracket base (D). Do not remove the shift cable by pulling the shift cable guide (E) and damper (F).





5. Disconnect the shift lock solenoid connector (A), transmission gear selection switch/park pin switch connector (B), and the sensor cluster connector (C).





6. Remove the harness clamps (D).
7. Remove the shift lever assembly.