Navigation System: Service and Repair

DVD-ROM Replacement

NOTE: Go on-line and check for any service bulletins or other service information regarding the navigation system.

1. Turn the ignition switch ON (II).




2. Open the cover (A) on the right side of the trunk to gain access to the navigation unit.
3. Press the EJECT button (B), then remove the DVD-ROM.
4. Insert the new DVD-ROM with the white label facing up.
5. Close the front cover. Do not turn the ignition switch OFF; watch the navigation screen until the data is down loaded to the navigation unit.
6. Do the Map Matching.

NOTE: After servicing, the front cover and PC card slot door must be closed.