Center Console Rear Cover Replacement

Center Console Rear Cover Replacement

Special Tools Required
KTC trim tool set SOJATP2014 *
* Available through the American Honda Tool and Equipment Program.

NOTE:
- Take care not to bend or scratch the trim and panels.
- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

1. Remove the center console rear section.




2. Open the armrest (A) and remove the screws, then remove the armrest.




3. Detach the clips, then pull the console upper trim (A) up and forward to release the hooks (B).




4. Remove the console pocket (A).
1. Open the console pocket, and release the hooks (B).
2. Pull the console pocket out to release the tabs (C).

5. Loosen the screws both sides.




6. Remove the screws then remove the center console rear cover (A).
7. Install the cover in the reverse order of removal, and note these items:
- Check if the clips are damaged or stress-whitened, and if necessary, replace them with new ones.
- Push the clips into place securely.