Front Seat Lumbar Support Replacement

Front Seat Lumbar Support Replacement

SRS components are located in this area. Review the SRS component locations and the precautions and procedures before doing repairs or service.

Driver's seat

NOTE:
- Put on gloves to protect your hands.
- Take care not to kink the cable.
- Take care not to tear the seams or damage the seat covers.

1. Remove the back panel.




2. Release the hooks (A) and clips (B).




3. Turn over the seat-back cover (A). Disconnect the power lumbar support motor connector (B), then remove the bolts.




4. Remove the metal clamps (A) and detach the clips, then remove the lumbar support (B) and motor (C) as an assembly.
5. Install the lumbar support in the reverse order of removal, and note these items:
- Make sure the cable is connected securely.
- To prevent wrinkles when installing a seat-back cover, make sure the material is stretched evenly over the pad before securing the hook strips.
- Replace the back panel clips with new ones.
- Replace the metal clips with new ones.